• <cite id="e00ye"><pre id="e00ye"></pre></cite>
  • <noscript id="e00ye"><wbr id="e00ye"></wbr></noscript>
  • <code id="e00ye"><wbr id="e00ye"></wbr></code>
    <dl id="e00ye"><acronym id="e00ye"></acronym></dl>
  • <li id="e00ye"></li>
    <center id="e00ye"></center>

    疯狂的交换小雅小姿1~6-老BWBWBWBWBWBWBW-久久女婷五月综合色啪小说-来一水AV@lysav

    Guilin Microtech Optical Instrument Co., Ltd. (MTO)

    Phone:+86-773-5823609

    PRODUCT

    Position:  > Product  >  Attachments  >  Stereo Microscopes Attachments  > Stands
    Stands

    Note:
    There are more than 10 kinds of stands which are with or not with illuminations can be selected. The microscopes' standard outfits stand of with built-in coaxial illumination is SD11, of not with built-in coaxial illumination is SD1.

    Model:SD1 Stand

    Introduction:
    ·Not with illuminator, the diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm

    SD1


    Model:SD2 Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separable power line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD2


    Model:SD3 Stand

    Introduction:
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD3


    Model:SD4 Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.

    SD4


    Model:SD5 Stand

    Introduction:
    ·Not with illuminator, the diameter of the round post is Φ25mm, the height is 240mm
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm

    SD5


    Model:SD6 Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD6



    Model:SD7 Stand

    Introduction:
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.


    SD7


    Model:SD8 Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.

    SD8


    Model:SD9 Stand

    Introduction:
    ·Big soleplate of polymethyl methacrylate
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.

    SD9


    Model:SD10 Stand

    Introduction:
    ·Big black anticorrosive soleplate, the size is 400×300×20mm.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.

    SD10

     

    Model:SD11 Stand

    Introduction:
    ·Black painting steel soleplate. And SD11 is steady.
    ·It can fix S7650 mechanical stage directly.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm


    Model:SD12 Stand

    Introduction:
    ·The special stand of coaxial illumination, the axes of the fixing main body hole and the stand woking stage is strictly vertical.
    ·The range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ76mm.

    SD12


    Model:SD1J Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD1J


    Model:SD2J Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD2J


    Model:SD3J Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The diameter of the center working stage is Φ95mm.

    SD3J


    Model:SD4J Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separable power line.
    ·The measurement to match between the support and the main body is Φ76mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.

    SD4J


    Model:   SD17 Round post sector Up and Down LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ76mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench

    SD17


    Model:  SD18 Square post sector Up and Down LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The range of the square post adjusting focus is 80mm.
    ·The measurement to match between the support and the main body is Φ76mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.

    SD18

    Model:   SD17J Round post sector Up and Down LED illumination Stands(With fine adjustment)

    Introduction: 
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ76mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.


    Model:  SD18J Square post sector Up and Down LED illumination Stands(With fine adjustment)

    Introduction: 

    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The range of the square post adjusting focus is 80mm.
    ·The measurement to match between the support and the main body is Φ76mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.

    SD18J


    Model:   SD2/3W Round post sector Up and Down 3W LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white 3W LED.
    ·In stands with the transmitted illumination of white 3W LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   50/60Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ76mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench

    国产人久久人人人人爽| 日本无遮挡边做边爱边摸| 成人精品视频99在线观看免费| 女人和拘做受全过程免费| 锕锕锕锕锕锕锕好多水社区| 天天做天天摸天天爽天天爱| 国产免费内射又粗又爽密桃视频| 亚洲AV无码久久精品狠狠爱浪潮| 亲爱的老师4中字韩国电影| 国产精品色情国产三级金瓶双艳| 麻豆亚洲AV熟女国产一区二| 日韩乱码人妻无码系列中文字幕| 欧美巨大另类极品videosbest| 亚洲第一成人网站| 亚洲女人被黑人巨大进入| 亚洲AV无码一区二区一二区| 我的SM经历1一25章| 男受被做哭激烈娇喘GV视频| 无码人妻AV免费一区二区三区 | 精品久久久久久无码国产| 吃奶呻吟打开双腿做受动态图| 国产麻豆剧传媒精品国产av| 生僻却美到爆的单字| 无码AV中文字幕久久专区| 欧美精品久久久久久久自慰| 生僻却美到爆的单字| 一边摸一边做爽的视频17国产| 成品网站W灬源码999交友| 无码高H熟肉日本动漫观看| 精品人妻AV一区二区三区| 久久久久99精品成人片三人毛片 | 欧洲熟妇色XXXXX欧美老妇伦 | 国产深夜男女无套内射| 亚洲AV无码一区二区三区网址| 国产精品免费无遮挡无码永久视频| 人妻丰满熟妇AV无码区HD| 一本一道AV无码中文字幕| 天天干,天天操,天天射| 人妻在厨房被色诱 中文字幕| AV毛片| 国产精品久久人妻互换|