• <cite id="e00ye"><pre id="e00ye"></pre></cite>
  • <noscript id="e00ye"><wbr id="e00ye"></wbr></noscript>
  • <code id="e00ye"><wbr id="e00ye"></wbr></code>
    <dl id="e00ye"><acronym id="e00ye"></acronym></dl>
  • <li id="e00ye"></li>
    <center id="e00ye"></center>

    疯狂的交换小雅小姿1~6-老BWBWBWBWBWBWBW-久久女婷五月综合色啪小说-来一水AV@lysav

    Guilin Microtech Optical Instrument Co., Ltd. (MTO)

    Phone:+86-773-5823609

    PRODUCT

    Stands

    There are more than 10 kinds of stands which are with or not with illuminations can be selected. The measurement to match between the support and the main body is φ45mm. The microscopes' standard outfits stand of with built-in coaxial illumination is SD11-D, of not with built-in coaxial illumination is SD1-D.

    Model:SD1-D Stand

    Introduction:
    ·Not with illuminator, the diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm


    Model:SD2-D Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separable power line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD3-D Stand

    Introduction:
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD4-D Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD5-D Stand

    Introduction:
    ·Not with illuminator, the diameter of the round post is Φ25mm, the height is 240mm
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm


    Model:SD6-D Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD7-D Stand

    Introduction:
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD8-D Stand

    Introduction:
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD9-D Stand

    Introduction:
    ·Big soleplate of polymethyl methacrylate
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.


    Model:SD10-D Stand

    Introduction:
    ·Big black anticorrosive soleplate, the size is 400×300×20mm.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.

     

    Model:SD11-D Stand

    Introduction:
    ·Black painting steel soleplate. And SD11 is steady.
    ·It can fix S7650 mechanical stage directly.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm


    Model:SD12-D Stand

    Introduction:
    ·The special stand of coaxial illumination, the axes of the fixing main body hole and the stand woking stage is strictly vertical.
    ·The range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ45mm.


    Model:SD1J-D Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD2J-D Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separablepower line.
    ·The diameter of the round post is Φ25mm, the height is 240mm.
    ·The range of holders adjusting focus is 50mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD3J-D Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·Not with illuminator, the range of the square post adjusting focus is 100mm.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The diameter of the center working stage is Φ95mm.


    Model:SD4J-D Stand

    Introduction:
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, 6V/10W, the reflected illumination of the halogen lamp.
    ·In Stand with 110V or 220V/5W the transmitted illumination of the fluorescent lamp.
    ·The up and down illuminators can use singly or simultaneity. Selected kinds of separable power line.
    ·The measurement to match between the support and the main body is Φ45mm.
    ·The range of the square post adjusting focus is 100mm.
    ·The diameter of the center working stage is Φ95mm.



    Model:
       SD17-D Round post sector Up and Down LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ45mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench



    Model:
      SD18-D Square post sector Up and Down LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The range of the square post adjusting focus is 80mm.
    ·The measurement to match between the support and the main body is Φ45mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.

     


    Model:  
     SD17J-D Round post sector Up and Down LED illumination Stands(With fine adjustment)

    Introduction: 
    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ45mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.



    Model:
      SD18J-D Square post sector Up and Down LED illumination Stands(With fine adjustment)

    Introduction: 

    ·Glancing inching coaxial handwheel, can adjust the tension of glancing adjusting handwheel.
    ·In holder with adjusting angles and lighteness, the reflected illumination of white LED.
    ·In stands with the transmitted illumination of white LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   47~63Hz
    ·The range of the square post adjusting focus is 80mm.
    ·The measurement to match between the support and the main body is Φ45mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench.



    Model:
       SD2/3W-D Round post sector Up and Down 3W LED illumination Stands

    Introduction: 
    ·In holder with adjusting angles and lighteness, the reflected illumination of white 3W LED.
    ·In stands with the transmitted illumination of white 3W LED.
    ·The up and down illuminators can use singly or synchronously. 
    ·The input voltage of wide range: AC90V~260V   50/60Hz
    ·The diameter of the round post is Φ25mm, the height is 240mm. 
    ·The range of holders adjusting focus is 50mm. 
    ·The measurement to match between the support and the main body is Φ45mm. 
    ·The diameter of the center working stage is Φ95mm. Match with a black-white workbench and a transparent glass workbench

    被多个男人调教奶头玩奶头 | 亚洲AV无码乱码在线观看,不卡| 久久精品国产亚洲AV无码麻豆| 亚洲男人天堂| 精品乱人伦一区二区三区| 亚洲国产一区二区A毛片| 亚洲精品无码久久久久秋霞| 国产片XXXXA片国语对白| 免费看片A级毛片免费看| 欧美激情一区二区三区| 免费60分钟床| 免费看美女被靠到爽的视频| 欧美丰满熟妇XX猛交| 少妇性按摩无码中文A片| 成品网站W灬源码999交友| 最近中文字幕国语免费高清6 | 一本色道久久88加勒比—综合| 国产精品扒开腿做爽爽爽A片小说| 亚洲熟女综合色一区二区三区| 亚洲AV无码国产精品色软件| 国产精品扒开腿做爽爽爽视频| 多毛熟女HDVIDOS| 青青草原精品99久久精品66| AV无码专区| 人妻体内射精一区二区三区| 女人下部毛毛高清| 亚洲AV日韩AV无码污污网站| 中文字幕日韩一区二区三区不卡| 国产成人无码综合亚洲日韩| 中国丰满人妻VIDEOSHD| AAAAA级少妇高潮大片免费看| 蜜桃臀无码内射一区二区三区 | 精品无码国产一区二区三区AV| 亚洲国产精品无码久久久秋霞1 | 18禁裸乳无遮挡啪啪无码免费| 日本VA欧美VA欧美VA精品| 用舌头去添高潮无码视频| 男女做爰爱免费视频A片| 无码少妇A片一区二区三区| 亚洲日韩AV无码中文字幕美国| 亚洲第一成人网站|